RP fence systems - fence posts with PVC and PE coating
We can offer you:
Fence posts made of steel tubes
Tube diameter and wall thickness according to DIN 2458
Pregalvanised according to DIN EN 10147 with a zinc layer of min 20mµ.
Hot-dipped galvanised according to DIN EN 50976 with an inner and outer zinc layer of min. 56mµ, max. 80mµ
Coating on the tube,
Our product range of fence posts
Available with the following finish:
- galvanized / PVC and PE coated
- galvanized / glued / PVC and PE coated
- Green RAL 6005
- Grey RAL 7030
- Other RAL colours for decorative pipes and fence posts can be supplied upon request.
- lengths of 4.75- 9m depending on the outer diameter
- all fixed lengths
- ready for installation, including corresponding accessories
RP fence systems - special types of fence posts
Single-side climb over protection (angled)
Available with 45° or 55° angle or any angle between 45° and 90° upon request. Further options: outward or inward angle; angle section and tube made of one piece to prevent corrosion at the intersection.
The angled section cannot be disassembled. Barbed wire can be mounted on the inside and the outside.
Mesh fixed at corner and end posts
by means of a plastic coated round bar of 10mm and an aluminium or galvanized steel mesh bar, dimensions: 20 x 5 mm, including pipe brackets,
PVC end covers made of coloured, weatherproof PVC for posts with a diameter between 34.7 and 103.1 mm diameter.
Bar and bridge connections
Aluminium hinge covers for pipe dimensions between 34.7 and 61.3 mm. Cap with slot for re-tensioning, connected by means of stainless steel pipe clamps for 34.7 to 90.4 mm posts.
Coach bolts, same quality of material. Nuts with fixed washer directly transfer pressure to the pipe.
T-connectors for barriers
Angular connector for barriers
for galvanized or PVC coated pipes of 61.3mm, type: aluminium.
Door frame profiles for gates and doors
Inner covering provided by meshed material with stainless steel brackets.